If you are looking to add some extra definition to your lashes, then applying them close to the lash line is a great way to do so. Here is a step-by-step guide on how to apply your lashes close to the lash line: 1) Start by ensuring that your lashes are clean and free of any makeup or oil.

Use a cotton swab dipped in cleanser to gently remove any residue. 2) Next, take your false lashes and measure them against your natural lash line. Trim the strip Lash down if necessary so that it fits comfortably along your lashline without overlapping.

3) Apply a thin layer of adhesive along the base of the false Lash strip and wait for 30 seconds until it becomes tacky. 4) Gently press the false Lash strip onto your lash line, as close to the roots of your natural lashes as possible. Hold for a few seconds until the adhesive sets.

  • Gently pull your lid taut and place the lash strip as close to your natural lash line as possible
  • Using a tweezer, pick up a single lash from the strip and gently apply it to your lid, as close to the lash line as possible
  • Continue applying lashes one by one until you have achieved your desired look
  • Once all lashes are in place, lightly press down on them to secure them and apply a thin layer of mascara if desired

How to Put on Eyelashes for Beginners

If you’ve never worn false eyelashes before, the thought of doing so can be a bit daunting. But there’s no need to worry – with a little practice, anyone can learn how to put on false eyelashes like a pro! Here’s a step-by-step guide to help you get started:

1. Start with clean, makeup-free lashes. Gently remove any dirt or oil from your natural lashes with a cotton swab and some cleanser. This will help the falsies adhere better and last longer.

2. Measure the lash against your eye to trim it to size. It should start at the inner corner of your eye and end just before your lash line curves upward. Use small scissors to make any necessary cuts.

3. Apply adhesive along the strip of the false lash, being careful not to use too much (a little goes a long way!). Wait 30 seconds for the glue to become tacky before proceeding. 4 .

Using tweezers or your fingers, carefully place the strip of falsies as close to your natural lash line as possible – starting at the inner corner of your eye. Gently press down along the entire length of the strip until it is secure in place. 5 .

If necessary, use an eyeliner pencil or liquid liner to fill in any gaps between your falsies and natural lashes, making sure that the products are safe for use on sensitive skin around the eyes . Mascara can also be used 6 . To remove , soak a cotton ball in an oil-based makeup remover and gently swipe over closed eyes until all traces of adhesive and product have been removed .

Struggling to Put on False Lashes

If you’ve ever tried to put on false lashes, you know it’s not as easy as it looks. In fact, it can be downright difficult and frustrating! Here are some tips to help you get those lashes on without all the struggle:

1. Start by trimming the lash strip to fit your eye shape. This will make them much easier to apply. 2. Use a good quality lash glue, and apply it sparingly to the strip.

Wait a few seconds for it to become tacky before applying the strip to your lash line. 3. Use tweezers or your fingers (whatever is easiest for you) to apply the strip close to your lash line. Press down gently to secure in place.

4. If you have any gaps between your natural lashes and the false ones, fill them in with a bit of liquid liner or mascara. Voila! You’ve successfully applied false lashes like a pro!

How to Put on Strip Lashes With Hands

If you’re anything like me, the thought of putting on false lashes creates a feeling of panic. I have never been able to put them on with my hands- it always seems like such a delicate process that is way too easy to mess up. But after years of practice (and a few YouTube tutorials), I’ve finally perfected the art of applying strip lashes with my hands.

Here’s how you can do it too: 1. Start by curling your natural lashes with an eyelash curler. This will help create a base for your falsies and make them blend in more seamlessly.

2. Next, apply a thin layer of lash glue to the strip lash. Be sure not to use too much, as this can make the lash harder to apply and can also cause irritation if it gets into your eye. 3. Wait about 30 seconds for the glue to become tacky before placing the lash strip on your lash line, as close to the base of your natural lashes as possible.

Use tweezers or your fingers to gently press down on the strip and secure in place. 4 . If there is any excess glue on your eyelid, carefully remove it with a q-tip or cotton swab dipped in makeup remover.

How to Apply Strip Lashes Underneath

How to Apply Strip Lashes Underneath: 1. Gently remove the strip lash from the packaging. If it is too curved, you can use your fingers to gently press it flat.

2. Place the strip lash on top of your natural lashes, as close to the base of your lashes as possible. Use a tweezers to help position the strip lash if necessary. 3. Once you have positioned the strip lash where you want it, use a small amount of Lash adhesive on a cotton swab or toothpick, and apply it along the base of the strip lash.

Wait 30 seconds for the adhesive to become tacky before proceeding. 4. Gently press down on the strip lash, starting at the inner corner and working your way outwards, until it is securely in place. Let the adhesive dry for 1-2 minutes before opening your eyes fully.

Do You Put Mascara on before Or After Fake Lashes

If you wear fake lashes, the general rule is to apply mascara before putting on the falsies. This will help blend your natural lashes with the fake ones and give them a more uniform look. Plus, it gives you a chance to really coat and define your own lashes before they get covered up.

However, there are exceptions to this rule. If your falsies are already pretty thick and full, you may want to forego mascara altogether so as not to weigh them down or make them clumpy. In that case, just be sure to curl your natural lashes first so they blend in nicely with the fakes.

And if you do use mascara, be sure to apply it very lightly—just one or two coats should do the trick.

How to Apply Lashes Close to Lash Line

Credit: www.buzzfeed.com

How Close Should Fake Eyelashes Be?

When it comes to fake eyelashes, the general rule of thumb is that they should be as close to your natural lash line as possible. This will give you the most natural-looking results. However, there may be some instances where you want to go for a more dramatic look and in this case, you can place your falsies further away from your lash line.

Just keep in mind that the closer they are to your lash line, the more natural they will look.

Do You Put Fake Lashes above Or below Real Lashes?

When it comes to applying fake lashes, there is no one-size-fits-all answer. It really depends on your own lash line and what looks best for you. If you have shorter lashes, you may want to put the falsies above your natural lashes so that they stand out more.

If you have longer lashes, you might want to put them below your natural ones for a more subtle look. Ultimately, it’s up to you and what you think looks best!

Where Should Your Eyelashes Sit?

There’s no definitive answer to this question – ultimately, it depends on what look you’re going for. However, there are some general guidelines that can help you achieve a flattering lash placement. For a natural look, your lashes should ideally sit just below your lower lash line.

This will give the illusion of fuller, healthier lashes without looking overdone. If you’re going for a more dramatic look, you can place your falsies slightly above your lower lash line. This will give your eyes a more open and awake appearance.

Just be careful not to go too high – otherwise you’ll risk looking like a cartoon character! Experiment with different placements and find what works best for you. And don’t forget to have fun with it!

Do You Stick False Eyelashes to Your Eyelid?

If you’re considering sticking false eyelashes to your eyelid, there are a few things you should keep in mind. First, it’s important to choose the right type of false lashes. There are two main types of false lashes: strip lashes and individual lashes.

Strip lashes are easier to apply, but they don’t look as natural as individual lashes. Individual lashes are more time-consuming to apply, but they look more realistic. Once you’ve chosen the right type of false lashes, it’s time to prepare your eyelids for application.

Start by cleansing your eyes and removing all makeup. Then, use a cotton swab to lightly coat your eyelids with petroleum jelly or another type of eye primer. This will help the false lash adhere better and prevent any irritation.

Now it’s time to apply the false lash! Begin by holding the strip lash up to your eye to measure where you need to cut it. Then, using a pair of scissors, carefully trim the strip lash so that it fits your eye shape.

Next, apply a thin line of glue along the base of the strip lash and wait 30 seconds for it to become tacky before applying it to your eyelid just above your natural lash line. Gently press down on the striplash until it is secure then let the glue dry for a few minutes before openning your eyes fully..

To remove the falsies later on , simply peel them off starting at the outer corner of your eye .


If you’re looking for a more natural lash look, try applying your falsies close to your lash line. This technique is relatively easy and only requires a few simple steps. Here’s how to do it:

1. Before anything else, make sure you have all the tools you need: false lashes, tweezers, scissors, and lash glue. 2. Next, measure the false lashes against your real ones to see how much needs to be trimmed off. Once you have the desired length, carefully snip off the excess with scissors.

3. Now it’s time to apply the glue! Starting from the outer edge of the falsie, dot on a generous amount of glue and wait about 30 seconds for it to get tacky. 4. Using tweezers, pick up the falsie by its middle and gently place it as close to your lash line as possible.

Start from the outer corner and work your way inwards until you’re satisfied with the placement.